Baltimore Permit Fee Calculator

City fee lines from the Baltimore permit pages, computed for your project. Sourced, verified Oct 2026.

Verified Oct 2026Calculator

This calculator applies the fee lines quoted on the Baltimore permit pages: the city's own plan review, permit and surcharge figures, as published by the Baltimore City Department of Housing and Community Development. Pick a project, change the inputs, and the breakdown shows each line and how it is computed. 9 of 10 project types have a computable formula on their page; the rest show the page's own figure.

  • Every permit carries the 5% Building Code Permit Tax, rounded up to the next dollar, plus a nonrefundable application fee: $25 for a one- or two-family dwelling without plan review, $125 with ePlans review.
  • Trade permits (plumbing, electrical, HVACR) are issued only to city-licensed contractors; there is no homeowner trade permit.

What the estimate covers

City fees only, on the ordinary residential path each page prices: the building or trade permit plus the mandatory lines the city adds to it. It leaves out whatever the page says is separate (a designer's fee, a contractor's licence, a utility connection) and anything the page does not price. Fee schedules change on the city's budget cycle; the month each page was last verified is Oct 2026, and the verification method explains how changes are caught.

Frequently asked questions

A 12x14 shed comes to $50 + $3 + $25 = $78.. A shed over 120 sq ft pays the flat $50 accessory-structure fee, the 5% permit tax rounded up and the $25 application fee, about $78.
A typical backyard fence therefore costs $25 + $2 + $25 = $52. Every new fence needs a permit at $10 per 100 linear ft or fraction, read with the code's $25 minimum, plus the 5% tax and the $25 application fee.
A $15,000 deck: $150 + $8 + $25 = $183.. Every deck needs a permit, read under the exterior-alteration rate of $10 per $1,000 of estimated cost ($50 minimum), plus the 5% tax and the $25 application fee.
an in-ground pool with a water connection and three circuits to about $228. A pool deeper than 24 in pays the flat $50 pool fee, $30 if connected to water and sewer and $6 per new circuit, plus the 5% tax and the $125 plan-review application fee.
An $8,000 rafter and sheathing repair costs $80 + $4 + $25 = $109. Replacing shingles or re-tarring needs no permit; structural roof work is an exterior alteration at $10 per $1,000 of estimated cost ($50 minimum), plus the 5% tax and the $25 application fee.
Every line is read off the Baltimore permit pages on this site, which quote the city's own fee schedule, bulletin or ordinance and record the month the sources were last verified (Oct 2026). The calculator holds no fee of its own.

Other city calculators

Related: All cities · Research: fees compared across 30 cities · Baltimore permit guide

Stay up to date
Get notified when we add new cities or update permit fees.