City fee lines from the Fort Worth permit pages, computed for your project. Sourced, verified Oct 2026.
Verified Oct 2026Calculator
This calculator applies the fee lines quoted on the Fort Worth permit pages: the city's own plan review, permit and surcharge figures, as published by the Development Services Department. Pick a project, change the inputs, and the breakdown shows each line and how it is computed. 10 of 10 project types have a computable formula on their page; the rest show the page's own figure.
Texas Local Government Code 214.907 bars value-based residential fees, so Fort Worth prices by square footage, by trade or by item under Fee Ordinance 26-28781 (effective October 1, 2026).
Every building permit adds a $33.08 application fee and a $16.87 technology fee; the electrical and HVAC pages say the technology fee may apply to standalone trade permits.
Fort Worth shed permit fee
Every storage shed needs a building permit, priced from the Group U square-footage table plus the $33.08 application fee and $16.87 technology fee.
$156.95estimated city fees at the inputs above
Line
How it is computed
Amount
Building fee (Group U table)
$102 + 25 × $0.20 per 1 above 175
$107
Application fee
flat
$33.08
Technology fee
flat
$16.87
The page's own example: “A 200 sq ft shed is $102.00 + (25 x $0.20) = $107.00, plus $49.95, for $156.95.”
Not included: Wiring or plumbing the shed is separate trade work with its own permit; a Board of Adjustment variance ($591) for a shed larger or taller than zoning allows.
Source: Fee Ordinance 26-28781, Group U table. Read the Fort Worth shed permit page, which quotes the rule and records when it was last verified (Oct 2026).
Fort Worth fence permit fee
Fences up to 7 feet (open wire up to 8 feet) need no permit; a taller solid fence is charged the one-trade residential fee plus the application and technology fees.
$168.95estimated city fees at the inputs above
Line
How it is computed
Amount
One-trade residential fee
flat
$119
Application fee
flat
$33.08
Technology fee
flat
$16.87
The page's own example: “an 8-foot solid wood fence comes to about $168.95”
Not included: Fences 7 feet or less, and open wire fences without slats up to 8 feet, are exempt (height is not a calculator input). Board of Adjustment special exception ($866) or variance ($591) for front-yard relief.
Source: Fee Ordinance 26-28781, residential per-trade schedule. Read the Fort Worth fence permit page, which quotes the rule and records when it was last verified (Oct 2026).
Fort Worth deck permit fee
A deck more than 6 inches above grade is charged from the Group U square-footage table plus the $33.08 application fee and $16.87 technology fee.
$176.95estimated city fees at the inputs above
Line
How it is computed
Amount
Building fee (Group U table)
$102 + 125 × $0.20 per 1 above 175
$127
Application fee
flat
$33.08
Technology fee
flat
$16.87
The page's own example: “A 300 sq ft deck is $102.00 + (125 x $0.20) = $127.00, plus $49.95, for $176.95.”
Not included: Decks 6 inches or less above grade (not over a basement) are exempt; lights or outlets are a separate electrical permit; a variance is $591.
Source: Fee Ordinance 26-28781, Group U table. Read the Fort Worth deck permit page, which quotes the rule and records when it was last verified (Oct 2026).
Fort Worth pool permit fee
A typical in-ground pool is a three-trade building permit plus the application and technology fees, with separate electrical and plumbing trade permits that each add an application fee and item fees.
$539.93estimated city fees at the inputs above
Line
How it is computed
Amount
Building permit, 3 trades
flat
$357
Application fee
flat
$33.08
Technology fee
flat
$16.87
Electrical permit application fee optional
flat
$33.08
Electrical item: swimming pool optional
flat
$56.48
Plumbing permit application fee optional
flat
$33.08
Plumbing item: first fixture or appliance optional
flat
$10.34
The page's own example: “Those add $133.00 ($66.16 in application fees + $56.48 + $10.34), for a total of about $539.93.”
Not included: Prefabricated above-ground pools of 5,000 gallons or less are exempt (gallons are not priced); gas heater or other equipment item fees; a variance is $591.
Source: Fee Ordinance 26-28781, residential per-trade schedule and trade item fees. Read the Fort Worth pool permit page, which quotes the rule and records when it was last verified (Oct 2026).
Fort Worth roof replacement permit fee
Shingle-only reroofs need no permit; a reroof that replaces any decking pays the flat one-trade remodel fee plus the application and technology fees.
$168.95estimated city fees at the inputs above
Line
How it is computed
Amount
One-trade residential remodel fee
flat
$119
Application fee
flat
$33.08
Technology fee
flat
$16.87
The page's own example: “A reroof with decking replacement therefore comes to $168.95.”
Not included: Shingle-only replacement with no decking replaced is exempt; replacing rafters or changing the pitch is a building permit the page does not price.
A residential remodel is charged $119.00 per trade plus the $33.08 application fee and $16.87 technology fee; same-spot fixture swaps need no permit.
$406.95estimated city fees at the inputs above
Line
How it is computed
Amount
Remodel fee per trade
3 units × $119
$357
Application fee
flat
$33.08
Technology fee
flat
$16.87
The page's own example: “A gut remodel touching building, plumbing and electrical is $357.00 + $49.95 = $406.95.”
Not included: Per-item trade fees ($4.22 per additional plumbing fixture, $0.54 per outlet or switch); a single-item job on a standalone trade permit (bathtub about $43.42, exhaust fan about $35.14) is priced differently.
Source: Fee Ordinance 26-28781, residential remodel per-trade schedule. Read the Fort Worth bathroom remodel permit page, which quotes the rule and records when it was last verified (Oct 2026).
Fort Worth kitchen remodel permit fee
A residential remodel is charged $119.00 per trade plus the $33.08 application fee and $16.87 technology fee; cabinets, counters and in-place appliance swaps need no permit.
$406.95estimated city fees at the inputs above
Line
How it is computed
Amount
Remodel fee per trade
$357
$357
Application fee
flat
$33.08
Technology fee
flat
$16.87
The page's own example: “A kitchen with building, electrical and plumbing work is $406.95.”
Not included: Per-item trade fees ($0.54 per outlet, $4.22 per additional plumbing fixture); a plumbing-only job on a standalone plumbing permit (about $43.42) is priced differently.
Source: Fee Ordinance 26-28781, residential remodel per-trade schedule. Read the Fort Worth kitchen remodel permit page, which quotes the rule and records when it was last verified (Oct 2026).
Fort Worth electrical panel permit fee
A panel or service change is a standalone electrical permit: the $33.08 application fee plus a service item priced by amperage, with the $16.87 technology fee possibly added.
$72.61estimated city fees at the inputs above
Line
How it is computed
Amount
Application fee
flat
$33.08
Service item by amperage
$39.53
$39.53
The page's own example: “Upgrading to a 200-amp service is $33.08 + $39.53 = $72.61.”
Not included: New circuits and devices at $0.54 per outlet, switch or light fixture; the electrician's charges.
Source: Fee Ordinance 26-28781, electrical schedule (services and subpanels). Read the Fort Worth electrical panel permit page, which quotes the rule and records when it was last verified (Oct 2026).
Fort Worth hvac permit fee
An equipment change-out is a standalone mechanical permit: the $33.08 application fee plus item fees by condenser tonnage and furnace size, with the $16.87 technology fee possibly added.
$55.64estimated city fees at the inputs above
Line
How it is computed
Amount
Application fee
flat
$33.08
Condensing unit item
$16.46
$16.46
Furnace up to 100,000 BTU optional
flat
$6.10
The page's own example: “A 4-ton condenser with an 80,000 BTU furnace is $33.08 + $16.46 + $6.10 = $55.64.”
Not included: Furnaces over 100,000 BTU pay $10.34 instead of $6.10 (not modeled, to keep the furnace a single switch); the separate electrical permit for new wiring or a disconnect.
Source: Fee Ordinance 26-28781, mechanical schedule. Read the Fort Worth hvac permit page, which quotes the rule and records when it was last verified (Oct 2026).
Fort Worth adu permit fee
New living space is charged by square footage from the R-3 table (a reduced rate up to 500 sq ft) plus the $33.08 application fee and $16.87 technology fee.
$672.95estimated city fees at the inputs above
Line
How it is computed
Amount
Building fee (R-3 table)
$570 + 100 × $0.53 per 1 above 700
$623
Application fee
flat
$33.08
Technology fee
flat
$16.87
The page's own example: “An 800 sq ft detached guest house is $570.00 + (100 x $0.53) = $623.00, plus $49.95, for $672.95.”
Not included: Electrical, plumbing and mechanical trade permits with their own application and per-item fees; a Board of Adjustment variance ($591).
Source: Fee Ordinance 26-28781, R-3 table. Read the Fort Worth adu permit page, which quotes the rule and records when it was last verified (Oct 2026).
What the estimate covers
City fees only, on the ordinary residential path each page prices: the building or trade permit plus the mandatory lines the city adds to it. It leaves out whatever the page says is separate (a designer's fee, a contractor's licence, a utility connection) and anything the page does not price. Fee schedules change on the city's budget cycle; the month each page was last verified is Oct 2026, and the verification method explains how changes are caught.
Frequently asked questions
A 200 sq ft shed is $102.00 + (25 x $0.20) = $107.00, plus $49.95, for $156.95.. Every storage shed needs a building permit, priced from the Group U square-footage table plus the $33.08 application fee and $16.87 technology fee.
an 8-foot solid wood fence comes to about $168.95. Fences up to 7 feet (open wire up to 8 feet) need no permit; a taller solid fence is charged the one-trade residential fee plus the application and technology fees.
A 300 sq ft deck is $102.00 + (125 x $0.20) = $127.00, plus $49.95, for $176.95.. A deck more than 6 inches above grade is charged from the Group U square-footage table plus the $33.08 application fee and $16.87 technology fee.
Those add $133.00 ($66.16 in application fees + $56.48 + $10.34), for a total of about $539.93.. A typical in-ground pool is a three-trade building permit plus the application and technology fees, with separate electrical and plumbing trade permits that each add an application fee and item fees.
A reroof with decking replacement therefore comes to $168.95.. Shingle-only reroofs need no permit; a reroof that replaces any decking pays the flat one-trade remodel fee plus the application and technology fees.
Every line is read off the Fort Worth permit pages on this site, which quote the city's own fee schedule, bulletin or ordinance and record the month the sources were last verified (Oct 2026). The calculator holds no fee of its own.