City fee lines from the Indianapolis permit pages, computed for your project. Sourced, verified Oct 2026.
Verified Oct 2026Calculator
This calculator applies the fee lines quoted on the Indianapolis permit pages: the city's own plan review, permit and surcharge figures, as published by the Indianapolis Department of Business and Neighborhood Services. Pick a project, change the inputs, and the breakdown shows each line and how it is computed. 8 of 10 project types have a computable formula on their page; the rest show the page's own figure.
The January 5, 2026 DBNS schedule is flat per permit, not valuation-based; each permit (ILP, structural, plumbing, electrical, heating and cooling) is a separate application.
Craft permits are priced by the size of the house and carry no application fee; a reinspection after a failed one is $175.
Indianapolis shed permit fee
A shed over 200 sq ft (or on a permanent foundation, or wired) pays a $140 Improvement Location Permit and a $490 accessory structural permit; wiring adds a $169 electrical permit.
Exempt: No permit for a one-story shed of 200 sq ft or less with no permanent foundation and no electrical, heating or cooling equipment (Sec. 536-201(b)(17)).
$630estimated city fees at the inputs above
Line
How it is computed
Amount
ILP application fee
flat
$32
Improvement Location Permit
flat
$108
Structural application fee
flat
$40
Structural plan review
flat
$150
Structural issuance
flat
$300
The page's own example: “A 12x20 shed (240 square feet) therefore costs $630 in city fees.”
Not included: Variances, the IHPC certificate of appropriateness in historic districts, and the builder's own costs.
Source: DBNS fee schedule, January 5, 2026 (accessory Class 2 structure). Read the Indianapolis shed permit page, which quotes the rule and records when it was last verified (Oct 2026).
Indianapolis fence permit fee
A fence that meets zoning (3.5 ft front, 6 ft side and rear) needs no permit and no fee; taller needs a variance of development standards at $550 plus $29 per standard.
No city fee figure on the page: There is no fence permit or fee from DBNS for a compliant fence; the only figure is the zoning variance for exceeding the height limit, which is a hearing petition, not a permit.
A deck 18 in or higher needs a $140 Improvement Location Permit; a deck over 30 in also needs a structural permit, $490 as an accessory structure or $290 as a miscellaneous residential permit, depending on how DBNS classifies it.
$630estimated city fees at the inputs above
Line
How it is computed
Amount
Improvement Location Permit
flat
$140
Structural permit, deck over 30 in (accessory subtype) optional
flat
$490
The page's own example: “Expect $430 to $630 in total city fees.”
Not included: A deck under 18 in needs only the assessor notice. DBNS may bill the structural permit as miscellaneous residential ($290) or, for an attached deck, as an addition ($40 + $175 + $750).
Source: DBNS fee schedule, January 5, 2026. Read the Indianapolis deck permit page, which quotes the rule and records when it was last verified (Oct 2026).
Indianapolis pool permit fee
An in-ground pool pays a $140 ILP, a structural permit ($490 accessory subtype), a $169 electrical permit for the pump and bonding, and a $153 heating permit if it has a heater.
$952estimated city fees at the inputs above
Line
How it is computed
Amount
Improvement Location Permit
flat
$140
Structural permit, accessory Class 2 subtype
flat
$490
Electrical permit (pump and bonding)
$169
$169
Heating permit (pool heater) optional
flat
$153
The page's own example: “Worked example, in-ground pool with a heater: $140 + $490 + $169 + $153 = $952; without a heater $799”
Not included: The ILP applies only over 200 sq ft of water surface (not an input); an above-ground pool 30 in or less deep and 15 ft or less wide needs no structural permit; variances.
Source: DBNS fee schedule, January 5, 2026. Read the Indianapolis pool permit page, which quotes the rule and records when it was last verified (Oct 2026).
Indianapolis roof replacement permit fee
A like-for-like reroof by a listed contractor or the owner-occupant needs no permit since January 1, 2026; structural work, a heavier covering or heat-applied roofing triggers a $290 or $390 structural permit.
What the city page states: the 2026 schedule charges $290 as a miscellaneous residential permit ($40 application, $100 review, $150 issuance) or $390 as a remodel/repair permit ($40, $150, $200) for a house up to 1,000 square feet
Not computed here: The ordinary reroof is exempt; when a permit is needed the fee depends on the subtype DBNS assigns at review, which the visitor cannot choose.
A new bathroom or layout change takes three permits, structural $390, plumbing $153 and electrical $169 for a house up to 1,000 sq ft, with $75 per additional 500 sq ft on the structural permit and $23 on each craft permit.
$712estimated city fees at the inputs above
Line
How it is computed
Amount
Structural permit (application, review) optional
$390
$390
Structural issuance over 1,000 sq ft optional
0 × $50 per 500 sq ft or fraction (first 1,000 sq ft free)
$0
Plumbing permit
$153
$153
Electrical permit optional
$169
$169
The page's own example: “a full layout change or a new bathroom is $712 in a house up to 1,000 square feet”
Not included: A failed inspection costs $175 to repeat; a septic permit from the county if a bedroom is added on septic.
A full kitchen remodel takes a $390 structural permit, a $153 plumbing permit and a $169 electrical permit for a house up to 1,000 sq ft, each scaling with house size.
$833estimated city fees at the inputs above
Line
How it is computed
Amount
Structural permit (application, review) optional
$390 + 1 × $25 per 500 above 1,000
$415
Structural issuance over 1,000 sq ft optional
1 × $50 per 500 sq ft or fraction (first 1,000 sq ft free)
$50
Plumbing permit
$153 + 1 × $23 per 500 above 1,000
$176
Electrical permit optional
$169 + 1 × $23 per 500 above 1,000
$192
The page's own example: “$390 + $25 + $50 for the structural permit, $153 + $23 plumbing, $169 + $23 electrical, about $833”
Not included: A bump-out addition is an ILP ($140) plus a $590 structural permit instead; licensed HVAC work for a large hood duct is a separate heating permit.
A furnace-and-AC replacement is a combined heating and cooling permit, $185 up to 2,500 sq ft plus $23 per additional 1,000 sq ft; a heating-only or cooling-only job is $153; all-electric equipment by an electrical contractor uses the $146/$178 electrical lines.
$208estimated city fees at the inputs above
Line
How it is computed
Amount
Combined heating and cooling permit
$185 + 1 × $23 per 1,000 above 2,500
$208
The page's own example: “So a furnace-and-AC replacement in a typical house is $185, and $208 in a 3,500 square foot house.”
Not included: Refrigeration equipment ($156); a $175 reinspection; a separate electrical permit for a circuit over 60 A or a new service.
Source: DBNS fee schedule, January 5, 2026. Read the Indianapolis hvac permit page, which quotes the rule and records when it was last verified (Oct 2026).
Indianapolis adu permit fee
A new detached secondary dwelling unit (up to 720 sq ft) needs five flat permits ($1,202); a conversion inside the house skips the ILP and uses the remodel lines ($865 to $897).
$1,202estimated city fees at the inputs above
Line
How it is computed
Amount
Improvement Location Permit (not needed for a conversion inside the house) optional
flat
$140
Structural: new accessory Class 2 structure
flat
$490
Plumbing: new residential structure
flat
$185
Electrical: new structure
flat
$202
Combined heating and cooling
flat
$185
The page's own example: “combined heating and cooling permit, $185. That is $1,202.”
Not included: The Citizens Energy Group sewer lateral permit and any county septic permit; a variance for a unit over 720 sq ft.
Source: DBNS fee schedule, January 5, 2026. Read the Indianapolis adu permit page, which quotes the rule and records when it was last verified (Oct 2026).
What the estimate covers
City fees only, on the ordinary residential path each page prices: the building or trade permit plus the mandatory lines the city adds to it. It leaves out whatever the page says is separate (a designer's fee, a contractor's licence, a utility connection) and anything the page does not price. Fee schedules change on the city's budget cycle; the month each page was last verified is Oct 2026, and the verification method explains how changes are caught.
Frequently asked questions
A 12x20 shed (240 square feet) therefore costs $630 in city fees.. A shed over 200 sq ft (or on a permanent foundation, or wired) pays a $140 Improvement Location Permit and a $490 accessory structural permit; wiring adds a $169 electrical permit.
Expect $430 to $630 in total city fees.. A deck 18 in or higher needs a $140 Improvement Location Permit; a deck over 30 in also needs a structural permit, $490 as an accessory structure or $290 as a miscellaneous residential permit, depending on how DBNS classifies it.
Worked example, in-ground pool with a heater: $140 + $490 + $169 + $153 = $952; without a heater $799. An in-ground pool pays a $140 ILP, a structural permit ($490 accessory subtype), a $169 electrical permit for the pump and bonding, and a $153 heating permit if it has a heater.
the 2026 schedule charges $290 as a miscellaneous residential permit ($40 application, $100 review, $150 issuance) or $390 as a remodel/repair permit ($40, $150, $200) for a house up to 1,000 square feet
a full layout change or a new bathroom is $712 in a house up to 1,000 square feet. A new bathroom or layout change takes three permits, structural $390, plumbing $153 and electrical $169 for a house up to 1,000 sq ft, with $75 per additional 500 sq ft on the structural permit and $23 on each craft permit.
Every line is read off the Indianapolis permit pages on this site, which quote the city's own fee schedule, bulletin or ordinance and record the month the sources were last verified (Oct 2026). The calculator holds no fee of its own.