City fee lines from the San Francisco permit pages, computed for your project. Sourced, verified Sep 2026.
Verified Sep 2026Calculator
This calculator applies the fee lines quoted on the San Francisco permit pages: the city's own plan review, permit and surcharge figures, as published by the San Francisco Department of Building Inspection. Pick a project, change the inputs, and the breakdown shows each line and how it is computed. 10 of 10 project types have a computable formula on their page; the rest show the page's own figure.
DBI building permits are priced on valuation (Table 1A-A, effective July 12, 2026): plan review only when plans are required, plus issuance; trade permits are flat amounts.
Planning adds its own building-permit application fee on the same valuation when it reviews the project.
Small state fees on valuation are not modeled.
San Francisco shed permit fee
A shed over the exemption (one detached storage shed under 100 sq ft and 8 ft is exempt on every reading) pays DBI plan review and issuance on valuation plus Planning's application fee.
Exempt: One detached storage shed per lot, no taller than 8 ft and 100 sq ft or less, needs no building permit on every published reading (DBI's FAQ allows 120 sq ft and 10 ft; ask DBI Technical Services between those figures).
DBI valuation: 150 sq ft × $71 = $10,650
$1,461.11estimated city fees at the inputs above
Line
How it is computed
Amount
DBI plan review
$310 + 9 × $28.35 per 1,000 above 2,000
$565.15
DBI permit issuance
$266 + 9 × $8.56 per 1,000 above 2,000
$343.04
Planning building-permit application fee
$516 + 7 × $5.27 per 100 above 10,000
$552.92
The page's own example: “about $550 for that shed, so the city total lands near $1,460”
Not included: Plumbing permits for a sink or toilet; state fees; the designer's fee. Habitable sheds, greenhouses and second sheds are never exempt.
Source: DBI Table 1A-A (effective July 12, 2026) and Planning's building-permit application fee. Read the San Francisco shed permit page, which quotes the rule and records when it was last verified (Sep 2026).
San Francisco fence permit fee
Fences up to 6 ft at side and rear lines or 3 ft in front need no permit; a taller fence pays DBI plan review and issuance on valuation plus Planning's application fee.
$1,153.82estimated city fees at the inputs above
Line
How it is computed
Amount
DBI plan review
$310 + 2 × $28.35 per 1,000 above 2,000
$366.70
DBI permit issuance
$266 + 2 × $8.56 per 1,000 above 2,000
$283.12
Planning building-permit application fee
$504
$504
The page's own example: “That puts a typical 8-foot backyard fence near $1,150 in city fees”
Not included: Fences within the exempt heights ($0; height is not an input); neighborhood notification for fences over 10 ft; state fees.
Source: DBI Table 1A-A (effective July 12, 2026) and Planning's building-permit application fee. Read the San Francisco fence permit page, which quotes the rule and records when it was last verified (Sep 2026).
San Francisco deck permit fee
A deck more than 30 inches above grade pays DBI plan review and issuance on valuation; over 3 feet, Planning's application fee is added.
DBI valuation: 300 sq ft × $53 = $15,900
$1,919.91estimated city fees at the inputs above
Line
How it is computed
Amount
DBI plan review
$310 + 14 × $28.35 per 1,000 above 2,000
$706.90
DBI permit issuance
$266 + 14 × $8.56 per 1,000 above 2,000
$385.84
Planning application fee (deck over 3 feet) optional
$516 + 59 × $5.27 per 100 above 10,000
$827.17
The page's own example: “so about $832 on the $16,000 deck, for a city total near $1,925”
Not included: Neighborhood notification ($121 plus $4.25 per envelope) and extra structural review at $602 per hour when required; state fees. Decks 30 inches or less above grade need no permit.
Source: DBI Table 1A-A (effective July 12, 2026) and Planning's building-permit application fee. Read the San Francisco deck permit page, which quotes the rule and records when it was last verified (Sep 2026).
San Francisco pool permit fee
An in-ground pool or spa pays DBI plan review and issuance on valuation (Table 1A-A), with separate flat trade permits; prefab above-ground pools up to 5,000 gallons need no building permit.
$2,498.30estimated city fees at the inputs above
Line
How it is computed
Amount
DBI plan review
$1,617 + 10 × $15.60 per 1,000 above 50,000
$1,773
DBI permit issuance
$677 + 10 × $4.83 per 1,000 above 50,000
$725.30
The page's own example: “A $60,000 in-ground pool pays $1,773 plus $725.30, about $2,498”
Not included: State fees; Planning's fee if it reviews the pool's location; the engineer's and contractor's fees.
Source: DBI Table 1A-A (effective July 12, 2026). Read the San Francisco pool permit page, which quotes the rule and records when it was last verified (Sep 2026).
San Francisco roof replacement permit fee
A full reroof of a house or duplex with no structural work is a flat online reroofing permit; DBI quotes it from $514 with the street space fee included.
$514estimated city fees at the inputs above
Line
How it is computed
Amount
Reroofing permit, street space fee included (house or duplex)
flat
$514
The page's own example: “DBI's online reroofing page quotes $514 and up and $714 and up because the Public Works street space permit fee is included”
Not included: State fees on valuation; a structural reroof (sheathing or framing) priced on the valuation schedule instead, about $1,056 on a $15,000 job.
Even an in-kind bathroom remodel needs a permit: DBI's issuance fee on a valuation of at least $20,552, plan review only when the layout changes, plus flat plumbing and electrical permits.
$1,023.64estimated city fees at the inputs above
Line
How it is computed
Amount
DBI permit issuance
$266 + 19 × $8.56 per 1,000 above 2,000
$428.64
Plumbing permit, Category 1P optional
flat
$290
Electrical permit (up to 10 outlets or devices) optional
flat
$305
The page's own example: “So a same-layout remodel with plumbing and electrical runs about $1,024”
Not included: State fees; an electrical permit for 11 to 20 devices is $450 rather than $305; contractor's fees.
Source: DBI Table 1A-A (effective July 12, 2026) and DBI's cost schedule minimum valuation. Read the San Francisco bathroom remodel permit page, which quotes the rule and records when it was last verified (Sep 2026).
San Francisco kitchen remodel permit fee
Even an in-kind kitchen remodel needs a permit: DBI's issuance fee on a valuation of at least $24,663, plan review only when the layout changes, plus flat plumbing and electrical permits.
$1,057.88estimated city fees at the inputs above
Line
How it is computed
Amount
DBI permit issuance
$266 + 23 × $8.56 per 1,000 above 2,000
$462.88
Plumbing permit, Category 1P optional
flat
$290
Electrical permit (up to 10 outlets or devices) optional
flat
$305
The page's own example: “That puts a same-layout kitchen with both trades near $1,050”
Not included: State fees; an electrical permit for 11 to 20 devices is $450 rather than $305; contractor's fees.
Source: DBI Table 1A-A (effective July 12, 2026) and DBI's cost schedule minimum valuation. Read the San Francisco kitchen remodel permit page, which quotes the rule and records when it was last verified (Sep 2026).
San Francisco electrical panel permit fee
A stand-alone panel or service replacement is a flat Category 3 electrical permit priced by the equipment's amperage.
$450estimated city fees at the inputs above
Line
How it is computed
Amount
Electrical permit, Category 3
$450
$450
The page's own example: “$450 for equipment rated 225 amps or less, which covers the usual 100, 125 and 200-amp residential services”
Not included: Re-inspections at $259 per half hour; a separate solar permit for panel work tied to PV.
A furnace, hydronic system or heat pump in one home is a flat Category 1M mechanical permit; a new circuit adds a separate electrical permit.
$290estimated city fees at the inputs above
Line
How it is computed
Amount
Mechanical permit, Category 1M
flat
$290
The page's own example: “That puts a straight furnace swap at $290”
Not included: A plumbing permit for a new gas line; Category 2M ($420) for 2-to-6-unit buildings; work outside the categories at $519 per hour.
Source: DBI Table 1A-C (effective July 12, 2026). Read the San Francisco hvac permit page, which quotes the rule and records when it was last verified (Sep 2026).
San Francisco adu permit fee
An ADU pays DBI plan review and issuance on valuation plus Planning's building-permit application fee on the same valuation, about 6 to 9 percent of construction cost.
$10,428estimated city fees at the inputs above
Line
How it is computed
Amount
DBI plan review
$1,617 + 75 × $15.60 per 1,000 above 50,000
$2,787
DBI permit issuance
$677 + 75 × $4.83 per 1,000 above 50,000
$1,039.25
Planning building-permit application fee
$5,638 + 250 × $3.86 per 100 above 100,000
$6,601.75
The page's own example: “A $125,000 garage conversion therefore pays about $3,826 at DBI ($2,787 plan review plus $1,039 issuance) and about $6,602 at Planning, roughly $10,400”
Not included: Impact fees (exempt under 750 sq ft or on lots with three or fewer units); school fees; the architect's and engineer's fees.
Source: DBI Table 1A-A (effective July 12, 2026) and Planning's building-permit application fee. Read the San Francisco adu permit page, which quotes the rule and records when it was last verified (Sep 2026).
What the estimate covers
City fees only, on the ordinary residential path each page prices: the building or trade permit plus the mandatory lines the city adds to it. It leaves out whatever the page says is separate (a designer's fee, a contractor's licence, a utility connection) and anything the page does not price. Fee schedules change on the city's budget cycle; the month each page was last verified is Sep 2026, and the verification method explains how changes are caught.
Frequently asked questions
about $550 for that shed, so the city total lands near $1,460. A shed over the exemption (one detached storage shed under 100 sq ft and 8 ft is exempt on every reading) pays DBI plan review and issuance on valuation plus Planning's application fee.
That puts a typical 8-foot backyard fence near $1,150 in city fees. Fences up to 6 ft at side and rear lines or 3 ft in front need no permit; a taller fence pays DBI plan review and issuance on valuation plus Planning's application fee.
so about $832 on the $16,000 deck, for a city total near $1,925. A deck more than 30 inches above grade pays DBI plan review and issuance on valuation; over 3 feet, Planning's application fee is added.
A $60,000 in-ground pool pays $1,773 plus $725.30, about $2,498. An in-ground pool or spa pays DBI plan review and issuance on valuation (Table 1A-A), with separate flat trade permits; prefab above-ground pools up to 5,000 gallons need no building permit.
DBI's online reroofing page quotes $514 and up and $714 and up because the Public Works street space permit fee is included. A full reroof of a house or duplex with no structural work is a flat online reroofing permit; DBI quotes it from $514 with the street space fee included.
Every line is read off the San Francisco permit pages on this site, which quote the city's own fee schedule, bulletin or ordinance and record the month the sources were last verified (Sep 2026). The calculator holds no fee of its own.