Subpanel: A secondary breaker panel that receives power from the main panel through a feeder and distributes it to its own branch circuits, often in a detached garage, addition or accessory dwelling unit.
What a Subpanel Does
A subpanel is a smaller breaker box that is not connected to the utility directly. A feeder from a breaker in the main panel supplies it, and it then splits that power into new circuits. Homeowners add one when the main panel is full, when a building is far from the house, or when a project needs many new circuits in one place, such as a workshop, a garage with an EV charger or an ADU.
Subpanels come in the same families as main panels, with the same breaker types, so AFCI and GFCI protection still apply to circuits that need it. The panel is rated in amps just like the main one, and its rating must not exceed what the feeder wire and the breaker in the main panel can safely support.
How the Wiring Differs
The key difference inspectors look for is the neutral and the ground. In the main panel they are connected together at the service. In a subpanel the National Electrical Code (NEC) requires them to be kept apart: the neutral bar floats on insulators, and a separate ground bar is bonded to the enclosure. That is why the feeder to a subpanel normally has four conductors. Mixing them up is a common correction on a plan review comment or inspection card, and it is a safety issue, not a style point.
Permits and Inspections
A subpanel is an electrical permit job in most places, and for a detached building the feeder trench may also draw its own inspection. A plan reviewer often asks for the panel size, the feeder size and a load calculation showing the main service can supply it. If the main service is already near its limit, the fix may be a service upgrade instead, covered in the electrical service entry. Inspections usually come at rough-in and final, and the feeder is inspected before it is buried.
Where It Comes Up on This Site
Subpanels appear in the scope of ADU permits and in many panel upgrades. The pricing for panel work varies a great deal by city; the electrical panel fee comparison shows the city fee for a service upgrade running from $57 in Baltimore to $450 in San Francisco, with a median of $108. A subpanel may be priced as a separate line or as part of a flat fee, depending on the fee schedule, so ask the permit office how a combined service-and-subpanel job is counted before you apply.