Dedicated Circuit: A branch circuit that runs from its own breaker in the panel to one appliance or a specific set of outlets, so nothing else shares the wire or the load.
What Dedicated Means
Most outlets in a home share a circuit with lights and other outlets. A dedicated circuit has its own breaker and its own wire, and serves only the thing it was installed for. A dishwasher, a microwave, an electric range, a dryer, a window air conditioner and an EV charger are common examples. Because nothing else draws from it, the breaker only trips for that appliance, and the wire is sized for that appliance alone.
The opposite is a general-purpose circuit, where several lights and outlets share one breaker. Those circuits are fine for lamps and chargers, but a space heater or a toaster plus a microwave can overload one, which is the usual reason a hallway breaker trips during dinner. Splitting heavy loads onto their own circuits keeps the rest of the house running.
Why Codes Require Them
The National Electrical Code (NEC) calls for dedicated circuits for loads that draw a lot of power or run for hours. Typical examples are 20-amp circuits for kitchen countertop outlets, a laundry circuit, a bathroom outlet circuit and individual circuits for fixed appliances such as ranges, dryers and many water heaters. Some of those circuits can serve several outlets, but only for that purpose. Adoption varies, and your city may amend the list, so read the plan review comment rather than a general rule.
Manufacturer instructions also matter. An appliance listing may say the unit must be on an individual circuit, and the inspector enforces that even where the code is silent. That is why a plan reviewer sometimes asks for the appliance model number.
How It Affects a Permit and Your Panel
Each dedicated circuit is another breaker space and more load on the service. A kitchen remodel that adds a range, an under-counter appliance and a microwave can fill a panel, which is why reviewers ask for a load calculation or simply push the project toward a panel or service upgrade. A permit for new circuits is an electrical permit in most places, and the inspector checks wire size, breaker size and labeling at the rough-in and final inspections.
Where It Comes Up on This Site
Kitchens, bathrooms and EV chargers all add dedicated circuits. Compare the triggers in the kitchen remodel research and the fees in the electrical panel fee research, where nine of the 30 cities price the permit by service amperage and the rest charge a flat fee, a value-based fee or itemized components. If your project adds circuits, the fee schedule matters less than whether the work pushes you into a panel or service upgrade, so look at the load before you look at the price.