Mini-Split: What It Means on a Permit

A ductless heat pump or AC that cools and heats single rooms, and why cities treat it as new equipment.

Updated November 2026 Glossary Term

Mini-Split: A ductless heating and cooling system with an outdoor compressor connected by a refrigerant line set to one or more wall- or ceiling-mounted indoor units.

What a Mini-Split Is

A mini-split has two parts: an outdoor unit with the compressor, and one or more indoor heads that blow conditioned air directly into a room. They are linked by a bundle of copper refrigerant lines, a power cable and a condensate drain, together called the line set. Because no ductwork is needed, mini-splits are popular for additions, garages, converted spaces and older houses without ducts.

Most mini-splits are heat pumps, so they heat as well as cool. On a permit form you may see them listed as ductless HVAC, a heat pump or a new mechanical system rather than by brand.

Why a Mini-Split Usually Triggers a Permit

A window air conditioner plugs into a wall and is exempt in most places. A mini-split is different: it is permanently installed, needs a hole through the wall, has a dedicated circuit and a disconnect, and carries refrigerant. Cities therefore treat it as new mechanical equipment, often with an electrical permit for the circuit as well.

If the mini-split is replacing an existing one in the same location, it may qualify as a like-for-like change-out, which some cities permit with a reduced fee or exempt entirely. Adding a mini-split where none existed is new work almost everywhere.

What Gets Inspected

Inspectors typically look at the outdoor unit's location and clearance from the property line and windows, its pad or wall bracket, the line set and how it enters the house, the condensate drain and the electrical disconnect within sight of the unit. The wall penetration should be sealed. If the system serves a bedroom, the city may also look at how the new load affects the panel. Multi-head systems with several indoor units are reviewed as one system.

Where the outdoor unit may sit is a zoning question as much as a mechanical one, because many cities limit equipment in side setbacks. See setback for how that works.

Where Mini-Splits Come Up on This Site

Our research on replacing a furnace or AC found window units exempt on 22 of the 30 cities' pages, while mini-splits and new systems are not exempt. For fees, the HVAC permit fee comparison shows the city's own example for a new or full system and for a change-out, and the fee calculator covers 30 cities. Mini-splits also come up in ADU and garage conversion projects, where a new room has no ducts to share. Read your city's page for whether it counts a mini-split as a new system or a change-out.

Frequently Asked Questions

In most cities, yes. Our research found window units exempt on 22 of 30 city pages, but mini-splits and new systems are not exempt. A mini-split replacing an identical one in the same place may be treated as a change-out with a lower fee, or exempt in a few cities.
It depends on the city and the work. Some cities issue HVAC permits to owner-occupants, others only to licensed contractors, and the refrigerant connections require federal certification to handle legally. Many homeowners buy a pre-charged line set kit, but the permit and inspection rules still apply. Check your city's page before you start.
Usually yes. Manufacturers require a dedicated circuit sized for the unit, and the electrical code calls for a disconnect near the outdoor unit. That circuit is often what pulls in an electrical permit, so ask whether your city bundles it into the HVAC permit or issues it separately.
Stay up to date
Get notified when we add new cities or update permit fees.