Like-for-Like Replacement: What It Means on a Permit

Swapping something for the same type, size and location, the phrase many permit exemptions turn on.

Updated November 2026 Glossary Term

Like-for-Like Replacement: Replacing an existing fixture, appliance, roof covering or piece of equipment with the same type and capacity in the same location, with no change to layout, structure or connections.

What Counts as Like for Like

The test is whether anything about the job changes beyond the item itself. A same-type water heater in the same spot, shingles over the same roof deck, or a toilet swapped in the same position are the standard examples. Changing the size, fuel, capacity, location or connections, adding a circuit or opening a wall usually takes the job out of the like-for-like category.

Each city defines it in its own words, so the same job can be treated differently across cities.

Cities often apply the same idea to roofing, plumbing fixtures, windows, doors and appliances, though each item has its own conditions on the city's page.

Why Cities Treat It Differently

Many cities exempt or fast-track like-for-like swaps because the risk is lower and the work follows existing connections. Others still require a permit for specific items, particularly gas appliances and anything that touches fuel, venting or electrical service. The result is a patchwork, not a national rule.

A same-type swap is also not a way around the building code: the new item must be installed to the current standard, even where no permit is required.

Capacity is a common catch. A bigger water heater, a higher-rated condenser or a larger electrical panel is generally not a like-for-like swap, even if it fits in the same space.

What It Changes for You

If your project qualifies, you may skip the plan review, pay a smaller fee or avoid the permit altogether. If you want it to qualify, confirm the definition with the city before work starts, and watch for add-ons that quietly end the exemption, such as new ductwork, a larger tank, moved plumbing or replaced decking. Contractors usually know the local line.

See change-out for the equipment version.

Ask the city to confirm in writing or by phone if you plan to rely on it. A short answer from the permit desk is worth keeping with your records.

Where It Comes Up on This Site

Like-for-like wording appears in our comparisons of furnace and AC replacement, where only 3 of 30 cities exempt a like-for-like AC or heat pump swap, roof replacement, where 16 exempt a like-for-like reroof, and the toilet replacement page, where 13 exempt a same-spot swap.

Fee schedules sometimes show a lower line for replacement work in the same place, which is the permit version of the idea even when the phrase is not used.

Frequently Asked Questions

It depends on the city and the item. Some cities exempt the swap, others still require a permit for specific work such as gas appliances. For example, our research shows a like-for-like AC swap is exempt in only 3 of 30 cities, so check your own city's rule.
Changing the size, capacity, fuel type, location or connections, or adding new circuits, ducts or piping. Replacing decking or sheathing under a roof can also end an exemption. Each city sets its own line, so ask before work starts.
Yes. The replacement should be installed to the current code and the manufacturer's instructions even if no permit is required. Unsafe or noncompliant work can still lead to enforcement, insurance trouble or problems when you sell.
Stay up to date
Get notified when we add new cities or update permit fees.