Battery Storage Permit: A permit, usually electrical, for installing a stationary home battery system and its wiring. Reviewers check where the unit is placed and how it connects to the panel and any solar array.
What the Permit Covers
A home battery stores electricity from the grid or from solar panels and feeds it back during outages or peak rates. Installing one adds a new power source to the house, so the work is an electrical permit job in most places. The reviewer looks at the battery's listing, the circuit and breaker sizes, the connection to the main panel and whether the system can island, meaning run the house during an outage. It also looks at whether the battery will charge from the grid, from solar only or both, because that affects the utility's review and any incentive paperwork. Whole-home backup systems often need a critical-loads subpanel, a term explained in the subpanel entry.
Location Rules
The International Residential Code (IRC) and fire codes limit where energy storage systems may be installed, mainly because lithium-ion batteries can burn. Model-code rules commonly allow units in garages, on exterior walls and in some utility spaces, and bar them from sleeping rooms and living spaces, with limits on how much energy one location may hold and required clearances. Local adoption varies by city, and some cities and fire departments are stricter. Check your jurisdiction's adopted edition before choosing a wall, because a unit that fits the manufacturer's instructions can still fail a local clearance or location rule. Garage installs may also need protection from vehicle impact, and some places want a smoke or heat detector in the same space.
Review and Inspection
Because batteries are new equipment for many reviewers, the paperwork can be heavier than for a standard panel: manufacturer spec sheets, listing documents, a one-line diagram, and sometimes a letter from the fire marshal. The inspector checks the unit's mounting, clearances, labels and disconnects. If the battery ties to solar, the two are often permitted together, and the utility may want its own application. See solar permit and utility release.
Where It Comes Up on This Site
Batteries usually come with a panel or service change, so read the electrical panel permit page and the electrical panel fee comparison. A battery adds load or backfeed to the service, so the amperage entry is relevant. Fees and rules for battery systems vary by city, and this site does not publish a figure for them. The related entries on solar permits and standby generators cover the other ways homes add backup or generation, and each has its own permit path.