Furnace Replacement: Removing an existing furnace and installing a new one, which cities usually treat as mechanical work because of the venting, combustion air, gas connection and electrical supply involved.
What the Permit Covers
A furnace burns fuel inside your home, so the code cares about more than heating. A permit for furnace replacement lets the city confirm the new unit is sized for the house, vented correctly, supplied with enough combustion air and connected safely to gas and power. Even a swap of the same size in the same closet is typically a mechanical permit job.
If the old furnace is a different type, such as an older atmospheric-draft unit replaced by a high-efficiency condensing model, the venting changes from a metal flue to plastic pipe through the wall, and the condensate must drain somewhere.
Venting and Combustion Air
Exhaust gases have to leave the house, and the furnace needs air to burn. A new high-efficiency furnace often uses PVC pipe for intake and exhaust, run through a side wall or the roof, with required distances from windows and the property line. Older furnaces vented into a masonry chimney may need a liner when the new unit is installed.
Combustion air depends on the room: a furnace in a tight closet may need openings or outside air ducts. Inspectors look at these because carbon monoxide risk is the main reason the permit exists. The common model-code rules (IMC and IRC) are adopted with local changes.
Gas, Electrical and the Second Permit
The new furnace connects to the gas line with a shutoff and a drip leg, and to a circuit and disconnect. Where the gas piping is altered or extended, a separate gas permit may be needed; see gas line permit. If the furnace is paired with a new air conditioner or coil, the whole job is a full system replacement and priced as such.
A furnace swap that is truly like-for-like may be a reduced-fee change-out in your city. Some cities also let the contractor certify the work rather than send an inspector. Either way, keep the final inspection sign-off, because it is the record that the venting and gas connection were checked.
Where Furnace Replacement Comes Up on This Site
Our research on replacing a furnace or AC found that a like-for-like gas furnace swap needs a permit in 28 of the 30 largest cities we cover; Chicago exempts it in kind and Miami's page does not name furnaces. Gas piping often adds a second permit. The same research reports the city's own change-out figure, ranging from $39 (Fort Worth) to $315 (San Jose), with a median of $105. See also the HVAC permit guide.