Shed Size Exemption: How Big Can a Shed Be?

The square footage under which a shed skips the building permit, and what an exemption does not excuse.

Updated November 2026 Glossary Term

Shed Size Exemption: The largest size of shed that a city lets you build without a building permit, usually expressed in square feet of floor area.

What the Exemption Means

Most cities list small accessory buildings, such as storage sheds, as work that does not need a building permit if the structure is under a stated size. That is the shed size exemption. It is a building code concept: below the line the city does not review the structure's design or inspect it for safety.

The line is not the same everywhere. The model residential code (IRC) exempts a one-story detached accessory structure up to 200 square feet, and the model building code (IBC) uses 120, and each city adopts its own number with local changes. The exemption usually also assumes the shed is a simple one-story building used for storage, not a workshop, studio or living space, which is a separate question.

120 or 200, and the Exceptions

Our research on permit-free shed sizes found the line runs from 100 to 300 square feet across the 30 largest U.S. cities we cover. Ten cities draw it at 120, eight at 200, four exempt no shed at all, Los Angeles uses a dollar value instead, and three publish two different numbers.

Read your page carefully: some cities measure floor area, others roof area including overhangs, and some limit height or require the shed to have no plumbing, electricity or foundation. Two sheds placed side by side may be added together by some reviewers, so a plan of several small buildings can cross the line even though each one is under it.

What an Exemption Does Not Excuse

Exempt from the building permit is not exempt from the rules. Sheds still have to follow setbacks from property lines, height limits, lot coverage and any easements, and some cities require a zoning filing even for an exempt shed. Adding electricity usually brings in an electrical permit, and plumbing a plumbing permit.

HOAs can set stricter size and style rules than the city, and a shed placed on a utility easement may have to be moved at your cost. If a neighbor complains, the city can enforce setbacks on a shed that never needed a permit.

Where the Exemption Comes Up on This Site

The size exemption research compares 30 cities, and the shed permit fee research shows what a shed that needs a permit costs, from $71 in Kansas City to $2,427 in San Diego, with a median of $243, plus nine cities that add a zoning fee. The shed permit guide and the project page walk through the steps. Because the number differs so much between cities, a shed kit sold as permit-free nationwide can still need a permit where you live, so check your own city page before you buy and before the delivery truck arrives.

Frequently Asked Questions

It depends on the city. Our research found sizes from 100 to 300 square feet, most commonly 120 in ten cities and 200 in eight. Four cities exempt no shed at all. Check whether your city measures floor area or roof area.
Possibly not a building permit, but other rules may apply: setbacks, height limits, lot coverage, and zoning filings in some cities. Running electricity or water to the shed usually brings in a trade permit. Read the exemption wording on your city page.
In some cities, yes, because they measure roof area, while others measure floor area. The difference can push a shed over the line. The way the line is measured differs across cities, so confirm with your building department.
Stay up to date
Get notified when we add new cities or update permit fees.