Journeyman Electrician: What It Means on a Permit

The middle license tier in the electrical trades: qualified to do the work, usually not to pull the permit alone.

Updated November 2026 Glossary Term

Journeyman Electrician: A journeyman electrician has finished an apprenticeship and passed a licensing exam, and may install electrical work, usually under the supervision or license of a master electrician or an electrical contractor.

What a Journeyman Electrician Is

The usual path in the electrical trades runs from apprentice to journeyman to master. A journeyman has completed the required training hours and passed an exam, so the person is trusted to wire a house, install devices and read plans without direct supervision on every task.

What a journeyman typically cannot do is run an independent electrical business or sign for the work as the responsible licensee. Those privileges belong to the master tier, or to a licensed electrical contractor. Names and rules differ by state and city, and a few places license only one level. Some states recognize licenses from neighboring states by agreement, but many do not, so a license earned elsewhere may not count when your city checks the number on your permit form.

Journeyman vs. Master on a Permit

On a permit form, the line that matters is who is named as responsible. In most cities the electrical permit is pulled by a master electrician or a licensed electrical contractor, and journeymen are listed as employees who do the work under that license.

That is why a journeyman hired on their own may be unable to pull your permit, even though they are fully qualified to do the work. Some jurisdictions do let a journeyman pull permits for an employer, or in limited cases for themselves. Read the permit office's rules for who is a permitted applicant. The local contractor registration, insurance and bonding rules can matter as much as the trade license itself. Compare master electrician.

What It Changes for a Homeowner

If a person offers to do electrical work and says they are a journeyman, ask whose license the permit will go under. A journeyman working for a licensed contractor is a normal arrangement. A journeyman working alone and proposing to skip the permit is a warning sign, because the inspector's sign-off is what protects you at resale and with insurance.

A homeowner doing their own work is a separate question. Many cities let an owner-occupant pull the permit for their own home, a rule the owner-builder research page compares across 30 cities.

Where It Comes Up on This Site

The term shows up on city pages that describe who may do electrical work, most often in the electrical panel permit pages and in the panel fee research, which records whether the homeowner or only a licensed electrician may apply. The broader permit is explained in electrical permit, and the licensing path above it is master electrician. Where a city page says only a licensed electrician may pull the permit, a journeyman working under a contractor's license is usually fine, and a journeyman working alone is usually not.

Frequently Asked Questions

Often not on their own. Most cities want the permit pulled by a master electrician or a licensed electrical contractor, with the journeyman doing the work under that license. A few jurisdictions allow a journeyman to pull permits for an employer. The city's permit rules say who qualifies as an applicant.
A journeyman has completed an apprenticeship and passed an exam to do electrical work. A master has more required experience, passed a higher exam, and can typically run a business, supervise others and take legal responsibility for permits. The exact titles and exams vary by state and city.
It depends on local rules. Where the license system requires the permit holder to be a master or contractor, a journeyman working alone may not be allowed to take on a job for the public. Ask whose license the permit is under, and confirm it with the licensing board.
Stay up to date
Get notified when we add new cities or update permit fees.