What Is the IECC? Energy Code on a Permit

The model energy code behind insulation, window and air-sealing requirements on remodels and new work.

Updated November 2026 Glossary Term

International Energy Conservation Code (IECC): A model code published by the International Code Council that sets minimum energy efficiency requirements for new and altered buildings, covering insulation, windows, air leakage, ducts and lighting.

What the IECC Requires

The International Energy Conservation Code sets minimum efficiency for the building envelope and equipment. In practice that means insulation levels in walls, attics and floors, window performance, air sealing, duct sealing and insulation, and efficient lighting. Requirements are organized by climate zone, so a house in a cold region faces stricter insulation rules than one in a warm region.

Houses can be reviewed under the IECC residential provisions or, in many states, under the energy chapter of the International Residential Code, which carries the same ideas.

Climate zones run from warm and humid to cold, and each carries its own minimum insulation and window values; your city's code page identifies its zone.

When a Permit Triggers Energy Compliance

New construction, additions and many alterations must show energy compliance. A reroof, a replaced furnace, a new window or an opened wall can each pull in a piece of it, such as added attic insulation or duct sealing. Cities differ on how much work counts, so the applicability is local, not national.

See building code for how the energy provisions fit with the rest of the adopted code.

Replacing windows, adding insulation or opening a wall are examples where a reviewer may ask what the new assembly will be. Expect the permit application or checklist to say what documentation is required, and ask the office if a minor repair is covered.

What Inspectors and Reviewers Look For

Plan review may ask for a compliance form or a list of insulation and window values. Field inspectors check insulation before drywall, window labels, duct work and, in some cities, air leakage testing. Documentation such as a window label or an insulation certificate often has to be left on site for the inspector.

If a test is required, it is usually done by a third party and reported to the city.

Reviewers rarely ask for calculations on small jobs; the compliance path chosen at application, prescriptive or performance, determines what you submit.

Where It Comes Up on This Site

Energy compliance shows up on HVAC, roof, window and addition permits. Our HVAC replacement rules research and the HVAC permit guide explain how a furnace or AC swap can bring in duct or efficiency checks.

California's separate energy standard is explained in Title 24.

Energy rules also touch kitchens and bathrooms when walls are opened and insulation is exposed. Whether an inspector checks it depends on the city and the scope of the permit.

Frequently Asked Questions

It means the work meets the minimum energy efficiency rules your city has adopted, such as insulation levels, window performance and duct sealing for the climate zone. The permit may ask for a compliance form or product labels, and an inspector may check the installed insulation or equipment against them.
It depends on what you change and on the city. Additions and large alterations usually trigger it for the new or altered parts. Small repairs often do not. The permit office or its published checklist states whether energy compliance applies to your specific project.
No. States adopt different editions and many amend them, and a few use their own energy standard, such as Title 24 in California. The climate zone also changes the numbers. Check the energy code your city or state currently enforces rather than the national model text.
Stay up to date
Get notified when we add new cities or update permit fees.