Work Exempt From Permit: What It Means

The list of small jobs a city says need no building permit, and what still applies when you skip one.

Updated November 2026 Glossary Term

Work Exempt From Permit: Construction a building code or city lists as not requiring a building permit, usually small, low-risk jobs such as painting, flooring, cabinets or small accessory buildings. Exempt work still has to meet the code and zoning rules.

Where the Exempt List Comes From

Model codes such as the IRC and IBC include a list of work that does not need a permit: painting, papering, flooring, cabinets and countertops, certain fences, and one-story detached accessory buildings below a size limit. Cities adopt the list and often change it, so the exempt list in your city can be longer or shorter than the model code's.

Where cities differ, our research pages compare them rather than assume a single rule.

Always read the exact wording of the exemption. Phrases like one-story, detached, accessory and not over a size or height are conditions, and missing one removes the exemption.

What Exempt Does Not Mean

Exempt means a permit is not required, not that the rules are optional. The work still has to follow the building code and the zoning rules, including setbacks, height limits and any homeowners association restrictions. Electrical, plumbing and mechanical work often has its own, narrower exemptions, so a job that is exempt from a building permit may still need a trade permit.

A city can also require a zoning filing for exempt work.

Cities also sometimes exempt work only when it is done by the owner, or only when it is under a dollar value. The research pages on this site report each city's own reading.

Why the Details Matter

Small differences decide the outcome: a shed at the size line, a fence at the height line, or a repair that becomes a replacement. A common IRC exemption covers a one-story detached shed up to 200 square feet, but local adoption varies and many cities use 120 square feet or none at all, so the number in your city is the one that counts.

If you are unsure, ask the building department. A short call is cheaper than unpermitted work.

Keep a note of why you believed the work was exempt, such as the section of the city page you relied on. If the city later disagrees, that record is useful when you ask for a determination.

Where It Comes Up on This Site

Exemptions are the core of several comparisons: shed size exemptions, fence permit rules, deck thresholds and roof replacement rules. In the shed comparison, 10 cities draw the line at 120 sq ft and 8 at 200 sq ft.

If a city has no exemption for a job at all, even a small one needs a permit. Our shed comparison, for example, found 4 cities that exempt no shed at all.

Frequently Asked Questions

No. Exempt work does not need a permit, but it must still meet the building code and zoning rules, such as setbacks and height limits. Inspectors and code enforcement can still act on unsafe or noncompliant work, so exempt means no permit paperwork only.
No. Model codes provide a starting list, and each city adopts and changes it. Some cities exempt more, others exempt less or nothing at all. Our research pages compare 30 cities on sheds, fences, decks and roofs so you can see the variation.
Sometimes. A job exempt from a building permit can still need an electrical, plumbing or mechanical permit, a zoning filing, or approval from a homeowners association. Check each requirement separately, because exemption from one does not carry over to the others.
Stay up to date
Get notified when we add new cities or update permit fees.