Range Hood and Makeup Air: What It Means on a Permit

Why a bigger kitchen hood can add an air-supply requirement to a remodel.

Updated November 2026 Glossary Term

Range Hood and Makeup Air: A range hood is a ducted exhaust fan over a cooktop; makeup air is the outside air supplied to replace what a powerful hood removes, so the house does not run under negative pressure.

What the Terms Mean

A range hood captures cooking smoke and grease and, if it is ducted, sends it outdoors. Its power is rated in cubic feet per minute (cfm). Makeup air is the replacement air: when a fan moves a large volume out of a tight modern house, the same volume has to come in from somewhere, or the house goes under negative pressure, which can pull combustion gases back down a chimney or flue.

Recirculating hoods with a charcoal filter do not vent outside and generally carry no makeup air requirement; ducted hoods do. Gas ranges and gas appliances in the same house raise the stakes, because backdrafting is a carbon monoxide risk.

The Common 400 cfm Rule

The model codes (the IRC and the IMC) commonly require makeup air for a kitchen exhaust system rated above 400 cfm, with the air supplied by a duct from outdoors, often with a damper that opens when the fan runs. Local adoption varies: some cities adopt the rule as written, some amend it, and some enforce it only for gas-burning homes or when the hood is part of a permitted remodel.

The practical consequence is that a high-powered professional-style hood can turn a simple appliance swap into a mechanical item, with an added duct, a damper and sometimes an interlock. Ask your city's plan reviewer, or read the hood's rated cfm from its spec sheet before you buy.

Why It Shows Up in a Kitchen Remodel

Installing a hood, or moving one, is mechanical work. If the remodel already needs a mechanical permit for new ductwork, the reviewer may ask for the hood's cfm and the makeup air plan. The duct itself must be metal, sealed and run to the outside rather than into an attic or soffit, and the termination needs a damper and clearance from windows.

A simple same-spot hood replacement with similar power usually does not draw the requirement, and installers often confirm the rating before they quote the job. Moving the cooktop to an island, upsizing the hood or adding a gas range commonly does.

Where It Comes Up on This Site

Hoods appear in our kitchen remodel permit guide and in the kitchen remodel trigger research, which found that a same-layout refresh needs no permit in 14 of 30 cities, a trade permit in 12 and a building permit in 3. Moving fixtures, adding circuits or removing a wall is where permits start everywhere. See also the kitchen remodel permit page. A hood is rarely the reason a kitchen needs a permit, but a powerful one can add a mechanical item to a project that already has one, so list its model and cfm when you apply.

Frequently Asked Questions

Model codes commonly require makeup air when a kitchen exhaust is rated above 400 cfm, but adoption varies by city. Recirculating hoods and low-power hoods are generally outside the rule. Check your hood's cfm and ask your building department how it applies the requirement.
A same-spot replacement of a similar hood is often not permit work, but cities differ, and the answer changes when you add ductwork, move the cooktop or install a much more powerful hood. See the kitchen remodel research for how cities treat remodel work, then confirm with your city.
A ducted hood must vent to the outdoors through a smooth metal duct, not into an attic, crawl space or wall cavity. The termination typically needs a backdraft damper and a minimum distance from windows and other openings. Specific distances come from local code.
Stay up to date
Get notified when we add new cities or update permit fees.