Minimum Permit Fee: What It Means on a Permit

The floor a city sets so even a very small job pays something.

Updated November 2026 Glossary Term

Minimum Permit Fee: The lowest amount a building department will charge to issue a permit, regardless of how small the project or how low its valuation or fee calculation comes out.

Why Cities Have a Minimum

Processing a permit takes roughly the same staff work whether the job is large or small: intake, record creation, issuance, and at least one inspection. If fees were purely a share of project cost, a tiny job could come out to almost nothing and not cover that work. A minimum permit fee sets a floor. When the normal calculation, such as a valuation bracket or rate per square foot, comes out below the floor, the floor is charged instead. It is a fixed amount in the fee schedule. The minimum is the same for every applicant, so it is easy to look up before you apply.

How It Affects Small Projects

The minimum matters most for inexpensive work: a water heater swap, a small fence, a minor electrical repair. For those jobs the calculated fee may be far lower than the minimum, so the minimum is what you pay. It is also why two small projects with different costs can have the same permit fee. The floor applies to the base permit fee; surcharges and review fees are still added after it, so the total can sit above the minimum. If your project is exempt from a permit entirely, no minimum applies, because no permit is issued.

Minimum Fees by Permit Type

Many cities set different minimums for different permit types, so the building permit, an electrical permit and a plumbing permit may each have its own floor. If one project needs three trade permits, you can pay three minimums. A city can also set a lower floor for over-the-counter permits. Some cities have no minimum and simply charge the calculated amount, so the number depends on the city. Look for a line near the top of the fee schedule that reads minimum permit fee or minimum charge. Each city sets its own floors, so compare your own city's list instead of assuming one amount applies.

Where It Comes Up on This Site

The minimum shows up in the lowest examples on the fee comparisons, where a small job may land on the city's floor. The fee calculator applies each city's minimum before adding other lines. See fence permit fees and shed permit fees for each city's own worked example. Whether a minimum exists and how large it is varies by city. The minimum is one reason small-job totals bunch together while large-job totals spread out.

Frequently Asked Questions

It is the lowest amount a city charges to issue a permit. If the usual calculation, such as a percentage of valuation, comes out lower, you pay the minimum instead. It exists so even small jobs cover the cost of processing and inspecting.
Usually not. The minimum applies to the base permit fee. Plan review, technology and state surcharges and other add-ons are charged on top where they apply, so your total can be higher than the stated minimum. Check the itemized lines on your city's fee schedule.
No, not when a minimum applies. Splitting a project into several smaller permits will not lower it either, since each permit can carry its own minimum. A project that is exempt from a permit has no fee at all, which is a different question from the minimum.
Stay up to date
Get notified when we add new cities or update permit fees.