Lot Coverage: What It Means on a Permit

The cap on how much of your lot can sit under roofs and structures, which adds up faster than most owners expect.

Updated November 2026 Glossary Term

Lot Coverage: Lot coverage is the percentage of a lot that zoning allows to be covered by buildings and other listed structures, calculated as the covered footprint divided by the lot area.

How Lot Coverage Works

Zoning rules cap how much of a lot may be built on, to leave room for light, drainage and open space. The rule is stated as a percentage: the footprint of everything counted, divided by the area of the lot. Your zoning district sets the number, and it is often different for the main house and for the whole lot.

Because it is a percentage of the lot, a small lot has little room. A house, a garage and a patio can use up the allowance, and a new addition or a backyard cottage may be refused for pushing coverage over the cap.

What Counts Toward Coverage

Which items count depends on the city's definition, so check the code before you assume. The main house and an attached garage always count. Detached garages, accessory structures such as sheds, covered porches and sometimes roofed decks usually count too, measured by their footprint.

Some cities also set a separate limit on impervious surface, which adds driveways, patios and paved areas. A roof overhang may or may not count. Open, uncovered decks and fences are often excluded. When a definition is unclear, ask the planning office how it measures before you pay for drawings.

What It Changes for You

Lot coverage is one reason a project that meets the building code is still denied. A plan with a new shed or a pool deck can break the cap on a lot that is already close. Calculate your existing coverage first: add up the footprints of the buildings, divide by the lot size, and compare with the district number.

If a project does not fit, you can shrink it, remove something else, or ask for a variance. Reviewers check the number during zoning review, so a site plan that shows each footprint and its dimensions saves a round of comments.

Where It Comes Up on This Site

Coverage is the rule behind many city notes on sheds, additions and ADUs. A shed can be exempt from the building permit and still count toward coverage, and the shed size exemption research makes the related point that exempt from the building permit is not exempt from paperwork. It also affects the ADU and home addition pages. When a city page says a structure must still meet zoning even though it needs no building permit, coverage is one of the numbers behind that line, so add the new structure to your count before you buy it.

Frequently Asked Questions

Often yes. Many zoning codes count detached accessory buildings, including sheds, by their footprint, even where the shed is exempt from a building permit. Definitions differ, and some codes exempt very small structures. Check your city's definition, because exceeding the cap can stop a project.
Lot coverage measures how much of the ground the buildings cover, as a percentage of the lot. Floor area ratio measures the total floor space across all stories against the lot size. A tall narrow house can pass one limit and fail the other. Many districts apply both.
Add up the footprint area of every structure the code counts, divide by the total lot area, and multiply by 100. Use dimensions from a survey or the site plan, and confirm which items count. The planning office can usually tell you the current figure and the district limit.
Stay up to date
Get notified when we add new cities or update permit fees.