What Is the International Plumbing Code (IPC)?

One of two major plumbing codes in the U.S., and the one behind many plumbing permit comments.

Updated November 2026 Glossary Term

International Plumbing Code (IPC): A model plumbing code published by the International Code Council that sets rules for pipe sizing, fixtures, drains, venting and water supply, adopted by states and cities in place of or alongside the Uniform Plumbing Code.

What the IPC Covers

The International Plumbing Code sets how water supply, drain, waste and vent systems are installed. It covers pipe materials and sizes, fixture connections, traps, venting, water heaters, backflow protection and the testing of finished work. For a homeowner, that is the rule book behind a kitchen sink move, a new bathroom, a water heater swap or a sewer connection.

In many places the plumbing chapters of the International Residential Code carry the same ideas for houses, so a residential job may cite either.

Because the code is built around water safety, it also lists what must be separated, such as drinking water from drains, which is why backflow protection and air gaps appear in plan review comments.

IPC vs. the UPC

The U.S. has two major plumbing codes. The IPC comes from the International Code Council and is used in a large share of states. The Uniform Plumbing Code, published by IAPMO, is used in others, including many western states. They agree on the goals but differ in details such as pipe sizing methods, venting layouts and approved materials.

Which one governs is decided by your state or city, so a detail that passes in one place may be rejected in the next.

If your project crosses a state line or your contractor works in several places, ask which code applies at the address before ordering materials.

What a Plumbing Inspection Checks

Inspectors check that work matches the adopted plumbing code: correct pipe materials, slopes on drain lines, trap and vent arrangements, shutoff valves, and water pressure or leak tests before walls are closed. A plumbing permit is what brings the work under inspection, usually with a rough-in visit followed by a final.

Open pipes, test gauges and accessible cleanouts are things the inspector expects to see when they arrive.

Water heaters and gas appliances add checks for relief valves, discharge lines and shutoffs. If a fixture is moved, the reviewer may also ask where it vents, since each fixture needs a path to the outdoors.

Where the IPC Comes Up on This Site

Plumbing rules touch bathroom, kitchen and water heater projects. Our bathroom remodel triggers research and toilet replacement research show which cities require a plumbing permit for a same-spot swap, which varies by city.

The bathroom remodel guide walks through the usual sequence. The cities' own pages, not the model code, say what needs a permit.

Cities also differ on who may pull a plumbing permit, so see owner-builder permit rules before assuming a homeowner may do the work.

Frequently Asked Questions

That depends on your state or city, which adopts one of the two and may amend it. Many states use the IPC, while several western states use the UPC. The plumbing inspector or the permit office can tell you which code and edition apply to your project.
Not in detail. The application asks what you are installing, and the inspector checks the work against the adopted code. Knowing the main rules, such as slope, venting and testing, helps you pass the first inspection, but many cities restrict who may do the work, so check that first.
Often yes, either directly or through the plumbing chapters of the residential code, depending on how your state adopted it. The rules are largely the same for houses. Your permit office states which volume is cited when a plumbing comment appears on your application.
Stay up to date
Get notified when we add new cities or update permit fees.