What Is the Frost Line? Why Footings Go Below It

The depth where soil can freeze, and the reason footings must go deeper in cold climates.

Updated November 2026 Glossary Term

Frost Line: The depth in the ground to which soil moisture typically freezes in winter, used by building departments as the minimum depth for footings so frost does not heave the structure.

What the Frost Line Is

The frost line, or frost depth, is how far down the soil freezes in a typical winter. Water in the ground expands when it freezes and can lift whatever sits above it. A footing placed above the frost line can be pushed up in winter and settle unevenly in spring, which cracks slabs and racks decks.

Frost depth ranges from nearly zero in the warmest regions to several feet in the coldest, and each city or county sets the number it enforces.

Snow cover, soil type and moisture all affect real frost depth, so the code number is a design value, not a measurement for a given winter.

Under the International Residential Code, each jurisdiction fills in its own design frost depth when it adopts the code, which is why the number differs from place to place.

How It Affects Footing Requirements

Building departments require footings to bear below the local frost depth, usually with a minimum even where the ground rarely freezes. That sets the depth of deck piers, porch footings and foundation walls. The inspector measures the hole against it before the pour.

Some exceptions exist, such as small freestanding structures on grade or foundations built with frost-protected methods, but those depend on the local code. See footing for how the inspection works.

If the footing is shallower than the code requires, expect the inspector to fail it and require you to dig deeper before pouring.

Finding Your Local Frost Depth

The permit office, the local code or a published handout lists the depth. A neighbor's rule of thumb is not reliable, since depth changes with climate, soil and elevation, and cities may use different numbers within the same state. The depth for decks is usually the same as for houses, though some cities allow a shallower one for detached structures.

Ask which depth applies to a deck, a fence and a shed if your city lists different values.

Where Frost Depth Comes Up on This Site

It matters on deck permits in particular, since deck footings are buried and checked before the pour. Our deck permit thresholds research compares city rules, and the fence permit rules research shows where post depth is mentioned. The shed permit guide covers pads and piers.

Because depth is local, always check your city's own page.

If you plan a deck on a cold-climate lot, ask for the depth before ordering a post hole auger or hiring an excavator.

Frequently Asked Questions

It depends on your location, and your city or county sets the number in its code. The permit office can tell you the frost depth for footings, and many publish it in a deck or foundation handout. Do not rely on a neighbor or a national map for permit work.
Not necessarily. Many cities set depth for fence posts by height or by the fence type, and some do not regulate it at all. A frost heave can still lift posts that are too shallow. Check your city's fence rules and your contractor's practice.
Less, since the ground rarely freezes, but building departments usually still require a minimum footing depth for stability. Some cities in warm regions list a small number for frost depth for that reason. The permit office states the minimum for your project.
Stay up to date
Get notified when we add new cities or update permit fees.