What Is a Code Edition on a Permit?

The year of the code your permit is reviewed under, which is not always the newest one.

Updated November 2026 Glossary Term

Code Edition: The published year of a model code, such as the IRC or NEC, that a state or city has formally adopted and enforces. Editions are issued every three years, and adoption often lags publication.

Why Codes Come in Editions

Model codes are revised on a regular cycle, usually every three years, and each version is named by its publication year. A new edition adds, changes or removes requirements, such as protection for outlets, energy performance or stair details. The edition year on a permit tells you which set of rules the reviewer and inspector are applying.

The model text is not law until a jurisdiction adopts it.

For a homeowner the practical effect is simple: the same project can pass under one edition and draw comments under another.

Typical examples are the residential code, the electrical code and the energy code, each of which has its own edition year and its own adoption date.

Adoption Lags Publication

States and cities review a new edition, hold hearings, add amendments and then set an effective date. That process often takes a year or more, and some places skip an edition. Different cities in the same state can even be on different editions, especially where state law lets cities choose.

So the code edition in force in your city can be older than the newest published one, and two nearby cities can disagree.

A few states also adopt a statewide edition that cities may not skip, which reduces but does not remove local variation.

Which Edition Applies to Your Permit

Generally the edition in force when you apply governs the permit, and some places set rules for how long an application remains under the older edition. The permit office, its code page or the plan review comments usually name the edition. If the comments cite a section you cannot find, you may be reading the wrong year.

See building code for how local adoption works.

Contractors and designers may work from a newer edition than the one your city uses, so ask which year the plan review is based on before ordering materials or drawings.

Where Edition Years Show Up on This Site

Where a city's own documents name a code edition, our city pages report it, and each page shows when it was last verified. Fee schedules change on a separate cycle; our permit fee changes in 2026 research shows which cities repriced permits.

The National Electrical Code and International Residential Code are the two codes where edition years most affect homeowners.

Edition years matter most for fees and details such as outlet protection and energy values, so confirm them on the city page instead of relying on a national table.

Where a page here cites an edition, it comes from the city's own documents and carries the date the page was last verified.

Frequently Asked Questions

Check the building department's code page, its plan review comments or its published checklists, which usually name the adopted edition. If you cannot find it, ask the permit office which edition applies to residential, electrical and energy work, since each can be on a different cycle.
It depends on the timing. In general the edition in force when the application is accepted governs that application, and a later adoption applies to new applications. Cities set their own transition rules, so ask the office if adoption is happening while your permit is pending.
Using a newer practice is generally fine if it also meets the adopted edition, but the inspector enforces the one your city has adopted. If the newer edition is less strict on a point, you still have to meet the adopted rule. Ask the inspector when the two disagree.
Stay up to date
Get notified when we add new cities or update permit fees.