Smoke and CO Alarms: Required life-safety alarms that sound on smoke or carbon monoxide. Building codes set where they go, how they are powered and whether they must be wired together, and a permit can trigger upgrades.
Where the Code Puts Alarms
The International Residential Code (IRC) calls for smoke alarms inside each sleeping room, outside each sleeping area and on every level of the home, including the basement. Carbon monoxide alarms are required where there is a fuel-burning appliance, a fireplace or an attached garage, usually outside sleeping areas on each level. Local adoption and state laws vary, and some states add rules on battery life or alarm type, so read what your jurisdiction enforces. Placement details matter too: alarms generally go on the ceiling or high on a wall, away from kitchen cooking and bathroom steam to limit false alarms, and combination alarms follow the same placement as the smoke type.
Interconnected and Hardwired
Interconnected means that when one alarm sounds they all sound, so a fire in the basement wakes someone upstairs. New construction and many major remodels must use alarms that are wired to the house power with a battery backup, and connected to each other by wire or by a listed wireless link. Existing homes with only battery units are often grandfathered until work is done. Dual-function smoke and CO combination units are common, but you still need the right number in the right places. When an alarm in a rented or sold home is older than its rated life, manufacturers set a replacement date, and some local rules or inspectors look at the date stamped on the back of the alarm.
When a Permit Triggers Upgrades
The IRC and many local codes require alarms to be brought up to the current rule when a permitted project involves interior alterations, repairs, additions or a new sleeping room. A kitchen or bathroom refresh may not touch the bedrooms, but an addition, a basement finish or a bedroom conversion almost surely does. The inspector tests each alarm at the final inspection, and a missing or non-working alarm is a common reason a final fails. See final inspection for what else is on that checklist.
Where It Comes Up on This Site
Alarms are a standard line on the final inspection for additions and remodels. The bathroom and kitchen research pages, bathroom remodel permit triggers and kitchen remodel permit triggers, show which cities require a permit for room work at all. Adding wired alarms is electrical work, so it ties to the electrical permit entry, and local rules vary. If a remodel leads to a panel or circuit change, the alarms are often added in the same permit and checked at the same inspection as the rest of the electrical scope, so list them on the application rather than treating them as an afterthought.