What Is Safety Glazing on a Window Permit?

Tempered or laminated glass required in doors, near tubs and low windows where people could be hurt by broken glass.

Updated November 2026 Glossary Term

Safety Glazing: Glass that is tempered, laminated or otherwise made to break in a way that reduces injury, required by the building code in hazardous locations such as doors, next to doors, near stairs and around tubs and showers.

What Safety Glazing Is

Safety glazing is glass that is made to reduce injuries if it breaks. Tempered glass shatters into small, mostly dull pieces. Laminated glass holds together because a plastic layer is bonded between two sheets. Other approved materials include some plastics. Permanent labels on the glass, called etch marks, show that it is rated.

It is not required for every window, only in places the code treats as hazardous.

Glass on a shower door or tub enclosure also has to be safety glass, and the label is usually on the door itself.

Where Model Codes Require It

Under the International Residential Code, hazardous locations include glass in doors, glass next to doors, windows near tubs and showers, windows close to stairs and landings and large low panes near the floor. The exact dimensions in the code depend on distance and height, and they are intended to catch locations where people are likely to fall or hit the glass.

These are model code rules. Local adoption varies, so check the version your city enforces.

Skylights and glass in guards have their own safety-glazing provisions in many codes.

What It Means for a Window Replacement

A window swap that is otherwise like-for-like can still trigger safety glazing if the new window sits in a hazardous location. Inspectors look for the etch mark or a label on the glass. If you replace a bathroom window next to a tub, ask the supplier about tempered glass at the time of ordering.

Egress openings, such as bedroom windows, have their own size and sill rules, covered in egress window.

If the label is missing, a supplier letter or the order paperwork may satisfy the inspector, but the label is the simplest proof.

Replacement glass in an existing window follows the same rule if the opening is in a hazardous location.

Where Safety Glazing Comes Up on This Site

It comes up on bathroom, kitchen, addition and window projects. Our bathroom remodel triggers research and bathroom remodel guide note when window changes pull in a permit, and the home addition guide covers additions.

Cities differ on whether a window replacement needs a permit at all, so confirm with the permit office.

Window changes also affect energy and egress rules, so a reviewer may ask about all three at once. The city's page says if a window swap needs a permit, and it is the best place to look before buying glass.

Ask for tempered glass in the quote if the opening is near a tub, door or stair.

Frequently Asked Questions

No. The code requires safety glazing in hazardous locations, such as doors, panes next to doors, windows near tubs, showers and stairs, and large low panes. Other windows may use regular glass. Local adoption varies, so check your city's rule and ask your window supplier.
Look for a permanent etched or sandblasted mark in a corner of the pane that shows it is safety glazing. Tempered glass may also show faint patterns under polarized light or sunglasses. If there is no mark, an inspector may not accept it.
If it is close to a tub or shower, often yes under the model residential code, because people can slip and hit the glass. The distance and height limits come from the adopted code. Ask your permit office or window supplier to confirm for your layout.
Stay up to date
Get notified when we add new cities or update permit fees.