Fixture Unit: What It Means on a Plumbing Permit

A plumbing code score that rates how much drain or water load each fixture adds, used to size pipes and sometimes to set fees.

Updated November 2026 Glossary Term

Fixture Unit: A unit of measure in plumbing codes that rates how much load a fixture places on the drain or supply system, based on how much water it uses and how often. Pipe sizes and some permit fees are counted in fixtures.

What a Fixture Unit Measures

Plumbing codes needed a way to size pipes without guessing how many people use a house. The answer is the fixture unit. Each fixture, whether a toilet, a bathroom sink, a bathtub or a washing machine, is assigned a number based on how much water it discharges and how likely it is to run at the same time as others. A toilet counts for more than a bathroom sink. The numbers add up to size the drain, vent and sometimes the water supply. Supply pipes use a related count, so a plan reviewer may ask about both when a bathroom is added.

How It Sizes Pipes

The International Plumbing Code (IPC) and Uniform Plumbing Code (UPC) contain tables that convert total fixture units into minimum drain and vent pipe diameters. A reviewer or plumber adds up the fixtures on each branch, then picks a size from the table. Adding a second bathroom or a basement kitchen raises the count and can mean a larger line or a new branch. The tables differ between the two codes, and local adoption varies, so use your jurisdiction's edition, and expect your plumber to do the arithmetic. The plumbing vent entry shows how vents are sized the same way.

Fixture Counts and Permit Fees

Many cities price plumbing permits by counting fixtures. A typical fee schedule has a base fee plus a charge per fixture, per trap or per outlet, so a remodel that adds three fixtures costs more than one that replaces a single one. Some cities count changes in the fixture unit sense and others count every device, and fee schedules vary widely. The toilet replacement research finds a published fee for one toilet from $27 to $290 across the cities that require a permit, which shows how far the per-fixture price varies.

Where It Comes Up on This Site

You will meet the term on plumbing permit applications and fee schedules, and in bathroom and kitchen projects. See the bathroom remodel research for how cities treat added fixtures and the bathroom remodel permit overview. The plumbing permit entry explains the application, and the P-trap entry covers a part every fixture needs. If your permit form asks for a fixture count, list each toilet, sink, tub, shower, dishwasher, washer and floor drain that is new, moved or replaced, and ask the permit office whether like-for-like swaps are counted.

Frequently Asked Questions

Under the model plumbing codes, a toilet is rated higher than most other household fixtures, around 3 drainage fixture units for a typical residential unit, while a bathroom sink is rated 1. Supply-side counts use different numbers. Exact values depend on the code edition and the fixture type, so use the table your city adopted.
Often. Many city fee schedules charge a base fee plus an amount per fixture, trap or outlet. Others use a flat fee or a project value. This varies a lot, so read your city's plumbing fee schedule and count the fixtures you are adding, moving or replacing.
A like-for-like swap normally leaves the count unchanged, because the new fixture has the same rating. Adding or moving fixtures changes the count and may change pipe sizes. Some cities still count a replacement as one fixture for fee purposes, so check the schedule.
Stay up to date
Get notified when we add new cities or update permit fees.