Elevation Certificate: What It Means on a Permit

A FEMA form from a surveyor showing how high your building sits compared with the expected flood level.

Updated November 2026 Glossary Term

Elevation Certificate: A FEMA form completed by a licensed surveyor or engineer that records the elevations of a building's lowest floor and equipment relative to the base flood elevation. Flood-zone permits and flood insurance rely on it.

What the Certificate Records

The elevation certificate documents how high the lowest floor, the machinery and other features sit compared with the base flood elevation, the height floodwater is expected to reach in a flood with a one percent chance each year. It is prepared by a licensed surveyor or engineer using measurements taken at the building. It also records the flood zone on the FEMA map.

The certificate is a record of the building as it stands, not an approval of any new work.

The certificate is based on the FEMA flood map in effect and the building's measured elevations, so it can change when maps are revised or the building is raised.

Why a Permit Office Asks for It

Communities in the National Flood Insurance Program run floodplain rules that apply on top of the normal building code. For a house in a mapped flood zone, the permit office may require an elevation certificate during construction, before final inspection or both. It is also how the city checks whether an improvement counts as substantial, the program's rule being that work costing half or more of the building's market value triggers bringing the whole structure up to floodplain standards.

Local rules can be stricter than the federal minimum.

Insurers use it to rate the policy, which means a lower floor than the flood elevation can mean higher premiums. Some owners order one even when no permit needs it.

What It Changes for You

If your property is in a flood zone, expect an extra cost and extra step: hiring a surveyor and sometimes waiting for a construction-stage certificate. The same form often matters to your flood insurance rates, so a copy can be worth keeping. An addition or a lift of the house can change the numbers, so a new certificate may be needed after the work.

Not every property needs one, and a surveyor may already have yours on file.

If your project is an addition, the city may want the certificate for the new part at the construction stage. The surveyor typically takes measurements once the lowest floor is in place.

Where It Comes Up on This Site

Floodplain requirements appear on larger projects such as additions and ADUs. See the home addition permit guide and the ADU permit guide, and read the plain definition of a flood zone.

The certificate is only relevant to properties in or near mapped flood hazard areas. If your lot is outside them, the permit office will not ask for one, though local floodplain rules should still be checked. Ask your city's floodplain administrator whether a certificate is on file for your address before ordering a new one.

Frequently Asked Questions

Only if your property is in a mapped flood zone and your city's floodplain rules call for it. It is typically requested for new construction, additions or substantial improvements. Check the permit checklist or ask the floodplain administrator for your jurisdiction.
A licensed land surveyor, engineer or architect, depending on state rules, completes and signs it after measuring the building. A homeowner cannot fill it in. If your property had one done before, the city, your insurer or a surveyor may have a copy.
No. A flood zone determination only tells you which FEMA zone the lot falls in. The elevation certificate measures how high your building is compared with the flood level. They are separate documents used for different purposes, including insurance rating.
Stay up to date
Get notified when we add new cities or update permit fees.