Permit Required? Required
Typical Fee Range $150–$350 Required for service panel upgrades; covers standard residential service up to 400 amps.
Fee Method Flat rate
Apply Online Apply at City of Las Vegas Department of Building and Safety →

What's Required in Las Vegas

  • Electrical permit mandatory for all panel replacements, relocations, or service upgrades
  • Work must comply with the National Electrical Code (2023 NEC) as adopted Jan 2026
  • Panels must be installed in accessible outdoor or garage locations per code
  • Proper grounding and bonding is mandatory for all service replacements
  • Electrical 'Release' from the city is required before NV Energy can restore power
  • Final electrical inspection required to close the permit and authorize power

Do You Need a Permit to Upgrade an Electrical Panel in Las Vegas?

Yes — panel work is one of the least optional permits in Las Vegas. Replacing or upgrading an electrical panel involves the service equipment for the whole house, so the city wants an inspection on the other side of it. Permit fees typically run $150–$350 through the City of Las Vegas Department of Building and Safety. An unpermitted panel is also one of the first things home inspectors and insurers flag, so the permit protects the resale, not just the wiring.

Upgrading From 100 to 200 Amps in Las Vegas

The classic project is moving from a 100-amp to a 200-amp service to feed an EV charger, heat pump, or induction range. In Las Vegas that's a permitted service upgrade like any panel change: permit, inspection, and a licensed electrician doing the work. Because the utility's service connection is involved, plan for coordination with your power company on disconnect and reconnect timing. Inspectors typically verify grounding and bonding, working clearances around the panel, and a properly labeled circuit directory before signing off.

How to Get a Electrical Panel Permit in Las Vegas

1

Step 1: Dashboard Login

Access the Las Vegas online dashboard and select 'Electrical Permit'.

2

Step 2: Choose Project

Select the service upgrade category and specify amperage (e.g., 200 Amp).

3

Step 3: Fee Payment

Pay the total permit and application fees online (estimated $150+).

4

Step 4: Installation

Replace the panel following all safety and code requirements.

5

Step 5: Inspection & Release

Schedule inspection; DBS notifies NV Energy for service restoration after passing.

Frequently Asked Questions

Yes, an electrical permit is always required for panel and service work.
Residential service upgrades typically cost between $150 and $350 in fees.
Yes, homeowners can pull permits for primary residences, but technical NEC knowledge is required.